• (+39) 0363 300227

  • commerciale@fpsnc.com

  • IT

S2V manual- Vertical sandblasting

S2V manual- Vertical sandblasting
The structure of the cabin is realized in steel plate with a strong thickness carefully double hand-painted in GREY RALL 7032 and JELLOW RALL 1028. Inside the cabin there is a good visibility thanks to the neon illumination system used, the neon is placed on the top side of the cabin and it is duly protected. Internal back part of the cabin is protected from the abrasive action by a thick anti-abrasive rubber cover. The cabin has an ample door with a inspection window in a special tempered glass that resists to the frosting action and easily to replace; the cabin is provided with two (2) lateral opening, one the right and one on the left, in order to have the possibility to sand-blast in manual mode, duly closed with soft anti-abrasive rubber. The dimension of the door are 830 x 1230 h mm.
N.B.: the cabin has also little lateral opening of 85 mm each on the right, on the left and on the top of the cabin, used for the passage of the glass plates, to perfect estate.
The glass plate that has to undergo the treatment, will be positioned on a motored transporting belt which is lodged in a (polizene) guide, opportunely protect in sandblasting zone.
- To avoid the abrasive discharge, the belt, before coming out, is blown automatically.
The machine is equipped with n° 1 (one) spray gun studied and realized by ALFEMA, permits to have an height capacity of air-abrasive mixture and consequently a wide spraying surface that ensure an excellent sand-blasting rapidity; the command happens by pneumatic pedal with a possibility of locking. The pistol is provided with a hard metal nozzle that ensure a long life of the pistol.
The advance of the sheet glass is semiautomatic and is realized by reducing motor. Movement is commanded through selectors to impel forward and back placed on the electrical panel.
The sheet of glass are leaned on bite belt supported by a polizene guide;
- Number 2 external racks, one on the right and one on the left, with relative support for the charge and discharge of the glass plates.
- Number 1 internal rack placed on the machine.
Automatic air dust collector for the dejection of the dust cloud of sandblast picked up by n° 1 filtering cartridge also it is equipped with of dust harvest container for the recycle of the abrasive.

Technical information

Less

Please contact us for any further information you might need